The short days of winter

Because I start later in the morning I finish earlier in the afternoon, after all its winter, but still there is progress to be seen, here are the 2 units that will be put under the stainless steel top we had made when we first moved here, the right hand unit is longer than presently in the house as we shall not install a dish washer.
I have used a ply board with high pressure laminate (HPL) for the construction and gluing HPL on the edges the draws are a metal sided runner with a 16mm bottom and back.
I have 2 more units to build one that will be mounted on the wall above the right hand one shown here the other will be under the compass rose top both of these will take longer as both are more complicated and winter days are short.
The pile of Rimu wood shown in the last post is destined to be the doors of these units so in the past week I have created a lot of sawdust trying to cut around the defects, the defects are such that I thought I was short of wood and may yet have to glue some together to achieve the size I need or show some defects I am not keen on either of these avenues and as I look at these photos I realise I need draw fronts, they will certainly need to be glued together to obtain the required width, this photo shows the rimu awaiting further attention but I await better machine knives to arrive from the USA with the hope it will reduce the sanding I will have to do.