V is for Victory

This is the forth table of this design I have made, the first ones were
all experiments one way or another, I have enjoyed having them
 around the house and being 3 legged works well when 1 leg is off the carpet and two legs are on the carpet it will not wobble.
I have now run out of material with only one table finished, I have enough pieces to do another top but nothing for the edges or the legs, it was a challenge squeezing these legs out of what I had available, the teak has a tendency to split if screwed too close to the end so there was a bit of gluing up happening.
I enjoy making the legs, they have a taper in the length and a single biscuit in the joint I glued on a temperary clamping block on that I cleaned of once the joint was made and the glue dry.
The top is 580mm across the flats or 23in for those who still use them, and 415mm high in inches that is 16.5 if I can be excused for mixing decimal with imperial.